3
Installation and Settings
49 /
64
Figure 88 Equipment Time Management
After the
equipment electric start, the default time is fro m year 1 970. This
equipment can get th
e current ti me from t he network NTP ser ver by N TP function.
In c
urrent Internet environment, many ser vers provide NTP servic e. If this function
is opened,
you must fill in IP ad dress of N TP server. Meanwhile, since the default
time NTP attained is Greenwich time (Time z
one 0), you should correctly set up your
time zone to ensure a
accurate time of your local time zone.
Figure 89 Equipment Time Management
Browsing time: If N
TP server is not avail able, you can use “Attain browsing time”
function, to
set your current browser computer time on this equipment.
3.7.7
Administration Interface
Open “ System → Administr
ation Interface → Modify main machine
name/Eq
uipment number”.
To Next Page
Loading...