3 Installation and Settings
35 / 64
Open “Wireless→Advanced”.
Figure 60 Advanced Configuration
RTS/CTS: RTS/CTS Protocol (Request to Send/Clear to Send), that is Request
sending/clear sending protocol, a mechanism which is adopted b y 802.11 wireless
protocol to reduce the conflicts caused from hiding node.
WMM:WMM (Wi-Fi Multimedia) provides basic QoS (Quality of Service) function for
802.11 networks. Power saving function is also realized in WMM.
Note:Be in Bridge-Station or Router-Station Mode.
3.5.4 Status
Open “ Wireless → Status-AP Mode/Station Mode”. as shown in the figure
below:
Figure 61 WLAN Status
3.5.5 Traffic Control
Open “Wireless→Traffic Control”.