3 Installation and Settings
44 / 64
1. Only using the application of supporting UPnP protoc ol (e.g. Thunder, Em ule,
PPLive, BT and MSN), this function is necessarily opened.
2. Since the current U PnP protocol security has not been totally e nsured, ple ase
close UPnP function when it is not required.
3. UPnP function is supported by operation system (e.g. Window s ME/Windows
XP/Windows Vista/Windows7).
3.7 System Configuration
3.7.1 System Settings
Open “System→Configuration→Save/Export/Loading”, click “Save” to sav e
the current configuration, as shown in the figure below:
Figure 74 Configuration Administration
Access configuration document, as shown in the figure below:
Figure 78 Access Configuration Document
Access: User could save the current configuration to restore the present settings in
requirement.
To Next Page
Loading...