Icon 2000 v4 Profibus EDD for AMS Manual
A
AA
A
© Copyright by BIFFI Italia. All right reserved 234/Rev.1 Page 18
Closing Break out Max. % of torque to unseat the valve in closing stroke
Closing Peak Max. % of torque when the valve runs from breakout to ending in
closing stroke
Closing Ending Max. % of torque to seat the valve in closing stroke
Date Closing Date of the closing stroke
It is possible to set reference data dates from “Configure/Setup - Maintenance Commands” page.
5.5 Maintenance Information / Operation Log
This Tab collects the Operation log information of icon 2000 v4 Actuator.
All the displayed data are READ-ONLY and static. The data are read from the actuator only when the
window is opened: a ‘Refresh’ button is present for re-read all the data from the actuator.
To Next Page
