Icon 2000 v4 Profibus EDD for AMS Manual
A
AA
A
© Copyright by BIFFI Italia. All right reserved 234/Rev.1 Page 19
The page is divided in two areas; one for the “General Maintenance Information”, the other for the “Recent
Maintenance Information”. The displayed data are:
Name Description
Contactor cycles Count of the cycles of contactors K1 and K2
Motor Run Time Count of the hours with motor energized
Time Without Power Count of the hours without electrical power
Utilisation Rate Incremented every 200 full stroke of the actuator
Opening time Time necessary to the valve to move from the close position to the open
position (only on “General Maintenance Information” area)
Closing time Time necessary to the valve to move from the open position to the close
position (only on “General Maintenance Information” area)
It is possible to clear recent maintenance information from “Configure/Setup - Maintenance Commands”
page.