Chapter 1 Introduction
The powerful gateways RS353j, RS353jw and RS353j-4G enable you to connect small
networks and your individual workstation or small company to the Internet and other part-
ner networks (e.g. to a corporate network) at low cost.
Safety notices
The safety precautions brochure, which is supplied with your device, tells you what you
need to take into consideration when using your access point.
Installation
How to connect your device is shown in on page . This chapter also tells you what prelim-
inary tasks are necessary for configuration.
Configuration
How to get your device running is explained in Basic configuration on page 21. There we
show you how to start up your device within a few minutes from a Windows PC with the
help of a Configuration Wizard and how to install other useful online assistants. At the end
of the chapter, you will be in a position to surf the Internet, send or receive e-mails and set
up a connection to a partner network to access data at your company head office, for ex-
ample.
Password
If you are already familiar with configuring bintec elmeg devices and want to get started
right away, all you really need to know is the factory default user name and password.
User Name:
Password:
Note
Remember to change the password immediately when you log in to the device for the
first time.
All bintec elmeg devices are supplied with the same password, which means they are
not protected against unauthorised access until you change the password.
How to change the passwords is described in chapter Modify system password on
page 26.
bintec elmeg GmbH
1 Introduction
bintec RS Series 1
To Next Page
Loading...
