BinTec RS353j - Scope of Supply

LED Farbe Status Information
off The device is connected to the WAN at 10
Mbits, or no Data transfer.
You can determine the status of the router in BRRP operation with the aid of the status
LED.
LED BRRP-Anzeige
LED Farbe Status Information
STATUS green flashing The device is functioning as a master router.
STATUS green Heartbeat (on
- on - off)
The device is functioning as a backup
router.
3.1.4 Scope of supply
Your device is supplied with the following parts:
Scope of supply bintec RS353j bintec RS353jw bintec RS353j-4G
Cable sets/mains unit/
other
Ethernet cable (yellow)
xDSL cable Type 2
(gray)
ISDN cable (black)
Power cable
19" Mounting frame
Screws
Ethernet cable (yellow)
xDSL cable Type 2
(gray)
ISDN cable (black)
Power cable
19" Mounting frame
Screws
2 exteral WLAN an-
tenna
Ethernet cable (yellow)
xDSL cable Type 2
(gray)
ISDN cable (black)
Power cable
19" Mounting frame
Screws
2 external LTE/UMTS
antenna
1 GPS antenna
Software Companion DVD, Dime
Manager (on DVD)
Companion DVD, Dime
Manager (on DVD)
Companion DVD, Dime
Manager (on DVD)
Documentation
Quick Install Guide and
safety notices (printed)
Installation poster
Quick Install Guide and
safety notices (printed)
Installation poster
Quick Install Guide and
safety notices (printed)
Installation poster
Online documentation
User's Guide
Workshops
MIB reference
User's Guide
Workshops
MIB reference
User's Guide
Workshops
MIB reference
3 Installation bintec elmeg GmbH
12 bintec RS Series