Chapter 2 About this guide
This document is valid for bintec elmeg devices with system software as of software ver-
sion 9.1.8.
The guide, which you have in front of you, contains the following chapters:
User's Guide - Reference
Chapter Description
Introduction You see an overview of the device:
About this guide We explain the various components of this manual and how to
use it.
Installation This contains instructions for how to set up and connect your
device.
Basic configuration This chapter provides a step-by-step guide to the basic func-
tions on your device.
Reset This chapter explains how to reset your device to the ex works
state.
Technical data This section contains a description of all the device's technical
properties.
Access and configura-
tion
This includes explanations about the different access and con-
figuration methods.
Assistants
System Management
Physical Interfaces
LAN
Wireless LAN
Networking
Routing Protocols
Multicast
WAN
VPN
All the configuration options of the GUI are described in this
chapter. The chapters are arranged in the same sequence as
the navigation menus in the GUI.
The individual chapters also contain general explanations on
the subsystem in question.
bintec elmeg GmbH
2 About this guide
bintec RS Series 3
To Next Page
Loading...
