Values in the Client Links list
Field Description
AP MAC Address Shows the MAC address of the client link partner.
Uptime Shows the time in hours, minutes and seconds for which the cli-
ent link in question is active.
Signal dBm (RSSI1,
RSSI2, RSSI3)
Shows the received signal strength in dBm.
Noise dBm Shows the received noise strength in dBm.
SNR dB Shows the signal quality in dB.
Data Rate mbps Shows the current clock rate of data received on this client link
in Mbps.
Rate For each of the specified data rates, displays the values for Tx
Packets and Rx Packets.
Tx Packets Shows the total number of packets sent.
Rx Packets Shows the total number of packets received.
22.6 Bridges
22.6.1 br<x>
In the Monitoring->Bridges-> br<x> menu, the current values of the configured bridges
are shown.
Fig. 217: Monitoring->Bridges
Values in the br<x> list
Field Description
MAC Address Shows the MAC addresses of the associated bridge.
Port Shows the port on which the bridge is active.
bintec elmeg GmbH
22 Monitoring
bintec RS Series 523
To Next Page
Loading...
