Field Description
Slave AP location Select whether the APs that the wireless LAN controller is to
manage are located in the LAN or the WAN.
Possible values:
• 0%1 03)! (default value)
• @ 23)!
The @ 23)! setting is useful if, for example, there is a
wireless LAN controller installed at head office and its APs are
distributed to different branches. If the APs are linked via VPN,
it may be that a connection is terminated. If this happens, the
relevant AP with the setting @ 23)! maintains its con-
figuration until the connection is reestablished. It then boots up
and the controller and the AP then resynchronize.
Slave AP LED mode Select the lighting scheme of the slave AP LEDs.
Possible values:
• (default value): Only the status LED flashes once per
second.
• <1#: All LEDs show their standard behavior.
• -$$: All LEDs are deactivated.
11.3 Slave AP configuration
In this menu, you will find all of the settings that are required to manage the slave access
points.
bintec elmeg GmbH
11 Wireless LAN Controller
bintec RS Series 175
To Next Page
Loading...
