EasyManua.ls Logo

BinTec RS353j - Domain Forwarding

BinTec RS353j
582 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The menu Local Services->DNS->Static Hosts->New consists of the following fields:
Fields in the Basic Parameters menu.
Field Description
DNS Hostname Enter the host name to which the IP Address defined in this
menu is to be assigned if a positive response is received to a
DNS request. If a negative response is received to a DNS re-
quest, no address is specified.
The entry can also start with the wildcard *, e.g.
*.bintec-elmeg.com.
If a name is entered without a dot, this is completed with OK
"<Name.> " after confirmation.
Entries with spaces are not allowed.
Response In this entry, select the type of response to DNS requests.
Possible values:
)#: A DNS request for DNS Hostname gets a negat-
ive response.
 (default value): A DNS request for DNS Host-
name is answered with the related IP Address.
): A DNS request is ignored; no answer is given.
IP Address Only if Response = 
Enter the IP address assigned to DNS Hostname.
TTL Enter the validity period of the assignment from DNS Hostname
to IP Address in seconds (only relevant for Response = 
) transmitted to requesting hosts.
The default value is  (= 24 h).
19.1.4 Domain Forwarding
In the Local Services->DNS->Domain Forwarding menu, a list of all configured forward-
ings for defined domains is displayed.
19 Local Services bintec elmeg GmbH
408 bintec RS Series

Table of Contents

Related product manuals