On-LAN->Interface Assignment menu.
19.12.3.1 Edit or New
Choose the icon to edit existing entries. Choose the New button to create other entries.
Fig. 186: Local Services->Wake-On-LAN->Interface Assignment->New
The Local Services->Wake-On-LAN->Interface Assignment->New menu consists of the
following fields:
Fields in the menu Basic Parameters
Field Description
Interface Select the interface for which a configured rule chain is to be as-
signed.
Rule Chain Select a rule chain.
19.13 BRRP
In the BRRPmenu you can configure the redundancy of your gateway.
Note
You require a licence for devices in the R23x series and RS series.
BRRP (Bintec Router Redundancy Protocol) is a bintec elmeg-specific implementation of
the VRRP (Virtual Router Redundancy Protocol). A router redundancy procedure is used
mainly to safeguard the availability of a physical gateway in a LAN or WAN.
Terms and Definitions
A number of special terms are used to describe the function. The following terms are
19 Local Services bintec elmeg GmbH
474 bintec RS Series
To Next Page
Loading...
