Field Value
Power Off Timeout Enter the time, in seconds, for how long the device is to remain
switched on after switching the motor off.
The default value is seconds.
7.2.2 Passwords
Setting the passwords is another basic system setting.
Fig. 23: System Management->Global Settings->Passwords
Note
All bintec elmeg devices are delivered with the same username and password. As long
as the password remains unchanged, they are not protected against unauthorised use.
Make sure you change the passwords to prevent unauthorised access to the device
If the password is not changed, under System Management->Status there appears
the warning: "System password not changed!"
The System Management->Global Settings->Passwords menu consists of the following
fields:
Fields in the System Password menu.
Field Value
System Admin Pass-
word
Enter the password for the user name %!.
7 System Management bintec elmeg GmbH
58 bintec RS Series
To Next Page
Loading...
