Field Value
• 6%1: Messages with emergency, alert and critical prior-
ity are recorded.
• : Messages with emergency, alert, critical and error pri-
ority are recorded.
• 2#: Messages with emergency, alert, critical, error and
warning priority are recorded.
• )%: Messages with emergency, alert, critical, error,
warning and notice priority are recorded.
• $ (default value): Messages with emergency,
alert, critical, error, warning, notice and information priority are
recorded.
• 5"#: All messages are recorded.
Maximum Number of
Accounting Log
Entries
Enter the maximum number of login process entries that are
stored internally in the device.
Possible values are to .
The default value is
Manual WLAN Control-
ler IP Address
This function is only available on devices with a wireless LAN
controller.
Enter the IP address of the WLAN controller.
The value can only be modified it the WLAN controller function
is enabled.
LED mode This function is only available for bintec W1003n, bintec
W2003n, bintec W2003n-ext and bintec W2004n.
Select the LEDs' lighting behaviour.
Possible values:
• (default value): The LEDS display their default beha-
viour.
• <1#: Only the status LED flashes once per second.
• -$$: All LEDs are disabled.
Fields in the menu Power Settings (for devices with GPS only)
bintec elmeg GmbH
7 System Management
bintec RS Series 57
To Next Page
Loading...
