12.5.1 Access Filter
This menu is for configuration of access filter Each filter describes a certain part of the IP
traffic and defines, for example, the IP addresses, the protocol, the source port or the des-
tination port.
A list of all access filters is displayed in the Networking->Access Rules->Access Filter
menu.
Fig. 98: Networking->Access Rules->Access Filter
12.5.1.1 Edit or New
Choose the icon to edit existing entries. To configure access fitters, select the New but-
ton.
Fig. 99: Networking->Access Rules->Access Filter->New
The Networking->Access Rules->Access Filter->New menu consists of the following
fields:
Fields in the Basic Parameters menu.
bintec elmeg GmbH
12 Networking
bintec RS Series 249
To Next Page
Loading...
