Field Description
This option can only be configured if certificates are loaded.
16.1.3 Phase-2 Profiles
You can define profiles for phase 2 of the tunnel setup just as for phase 1.
In the VPN->IPSec->Phase-2 Profiles menu, a list of all configured IPSec phase 2 profiles
is displayed.
Fig. 130: VPN->IPSec->Phase-2 Profiles
In the Default column, you can mark the profile to be used as the default profile.
16.1.3.1 New
Choose the New button to create additional profiles.
bintec elmeg GmbH
16 VPN
bintec RS Series 349
To Next Page
Loading...
