Fields in the menu Wireless Settings
Field Description
Operation Mode
Define the mode in which the wireless module of your device is
to operate.
Possible values:
• -$$ (default value): The wireless module is not active.
• 3%% / :# 09 ': Your device is
used as an access point in your network.
• 3%% 61: Your device serves as an Access Client in
your network.
• :# 09 61: Your device is used as a wireless
bridge link in your network (available only for the devices of
the bintec W1003n, W2003n, W2003n-ext und W2004n
series) .
Operation Band Select the operation band and, where applicable, the usage
area of the wireless module.
For Operation Mode = 3%% / :# 09
' or :# 09 61
Possible values:
• ?H /- (default value): Your device is oper-
ated at 2.4 GHz (mode 802.11b and mode 802.11g), inside or
outside buildings.
• ?H : Your device runs in 5 GHz (Mode 802.11a/h)
inside buildings.
• ?H -: Your device runs in 5 GHz (Mode
802.11a/h) outside buildings.
• ?H /-: Your device is run with 5 GHz (Mode
802.11a/h) inside or outside buildings.
Usage Area Only for Operation Mode = 3%% 61 and Operation
Band = ?H or ?H
Possible values:
• - (default value)
•
10 Wireless LAN bintec elmeg GmbH
144 bintec RS Series
To Next Page
Loading...
