BinTec RS353j - Page 171

Field Description
WPA Mode Only for Security Mode = 23 4 and 23 +
Select whether you want to use WPA (with TKIP encryption) or
WPA 2 (with AES encryption), or both.
Possible values:
• 23  23  (default value): WPA and WPA 2 can be
applied.
• 23: Only WPA is applied.
• 23 : Only WPA 2 is applied.
WPA Cipher Only for Security Mode = 23 4 and 23
+ and for WPA Mode = 23 and 23  23 
Select the type of encryption with which to apply WPA.
Possible values:
• 3 : AES is used.
• *4: TKIP is used.
• 3  *4 (default value): AES or TKIP is used.
WPA2 Cipher Only for Security Mode = 23 4 and 23
+ and for WPA Mode = 23  and 23  23

Select the type of encryption with which to apply WPA 2.
Possible values:
• 3 : AES is used.
• 3  *4 (default value): AES or TKIP is used.
Preshared Key Only for Security Mode = 23 4
Enter the WPA password.
Enter an ASCII string with 8 - 63 characters.
bintec elmeg GmbH
10 Wireless LAN
bintec RS Series 157