Field Description
The function is disabled by default.
Allowed Addresses Use Add to make entries and enter the MAC addresses (MAC
Address) of the clients to be permitted.
Fields in the menu Bandwidth limitation for each WLAN client
Field Description
Rx Shaping Select a bandwidth limitation in the receive direction.
Possible values are
• ) 1 (default value)
• '"/ up to '"/ in single Mbit/s steps,
'"/, '"/, & '"/, '"/ and
'"/.
Tx Shaping Select a bandwidth limitation in the transmit direction.
Possible values are
• ) 1 (default value)
• '"/ up to '"/ in single Mbit/s steps,
'"/, '"/, & '"/, '"/ and
'"/.
Fields in the menu Advanced Settings
Field Description
Beacon Period Enter the time in milliseconds between the sending of two
beacons.
This value is transmitted in Beacon and Probe Response
Frames.
Possible values are to &.
The default value is ms.
DTIM Period Enter the interval for the Delivery Traffic Indication Message
(DTIM).
The DTIM field is a data field in transmitted beacons that in-
forms clients about the window to the next broadcast or multic-
ast transmission. If clients operate in power save mode, they
10 Wireless LAN bintec elmeg GmbH
160 bintec RS Series
To Next Page
Loading...
