Status Meaning
Offline The AP is either administratively disabled or switched off or has
its power supply cut off etc.
11.3.1.1 Edit
Choose the icon to edit existing entries.
You can also delete entries using the icon. If you have deleted APs, these will be loc-
ated again but shall not be configured.
Fig. 68: Wireless LAN Controller->Slave AP configuration->Slave Access Points->
The data for wireless module 1 and wireless module 2 are displayed in the Wireless LAN
Controller->Slave AP configuration->Slave Access Points-> menu if the correspond-
ing device has two wireless modules. With devices featuring a single wireless module, the
data for wireless module 1 are displayed.
The menu consists of the following fields:
Fields in the Access Point Settings menu.
Field Description
Device Displays the type of device for the AP.
bintec elmeg GmbH
11 Wireless LAN Controller
bintec RS Series 177
To Next Page
Loading...
