Field Description
• #1: Enables the entry of a port number.
• @#: Enables the entry of a range of port numbers.
• 1#: Entry of privileged port numbers: 0 ... 1023.
• : Entry of server port numbers: 5000 ... 32767.
• 61 : Entry of client port numbers: 1024 ... 4999.
• 61 : Entry of client port numbers: 32768 ... 65535.
• ) +1#: Entry of unprivileged port numbers: 1024
... 65535.
Enter the appropriate values for the individual port or start port
of a range in Port and, for a range, the end port in to Port.
Destination Port Only for Layer 4 Protocol = *6 or .5
Enter the destination port.
First select the port number range.
Possible values:
• 3( (default value): The route is valid for all port numbers.
• #1: Enables the entry of a port number.
• @#: Enables the entry of a range of port numbers.
• 1#: Entry of privileged port numbers: 0 ... 1023.
• : Entry of server port numbers: 5000 ... 32767.
• 61 : Entry of client port numbers: 1024 ... 4999.
• 61 : Entry of client port numbers: 32768 ... 65535.
• ) +1#: Entry of unprivileged port numbers: 1024
... 65535.
Enter the appropriate values for the individual port or start port
of a range in Port and, for a range, the end port in to Port.
DSCP / TOS Value Select the Type of Service (TOS).
Possible values:
• # (default value): The type of service is ignored.
• 56 :( E1: Differentiated Services Code Point
according to RFC 3260 is used to signal the priority of IP
packets (indicated in binary format).
bintec elmeg GmbH
12 Networking
bintec RS Series 213
To Next Page
Loading...
