Field Description
this, check "1
Disable the option if you only want to forward one defined mul-
ticast group to a particular interface.
The option is deactivated by default.
Multicast Group Ad-
dress
Only for All Multicast Groups = not active.
Enter here the address of the multicast group you want to for-
ward from a defined Source Interface to a defined Destination
Interface.
Source Interface Select the interface on your device to which the selected multic-
ast group is sent.
Destination Interface Select the interface on your device to which the selected multic-
ast group is to be forwarded.
14 Multicast bintec elmeg GmbH
276 bintec RS Series
To Next Page
Loading...
