Field Description
specified port number is verified. If a port range is to be
checked, enter the upper limit here.
Possible values are to &.
Source Port Range Only for Protocol = *6, .5/*6 or .5
In the first field, enter the source port to be checked, if applic-
able.
If a port number range is specified, in the second field enter the
last port of the port range. By default the field does not contain
an entry. If a value is displayed, this means that the previously
specified port number is verified. If a port range is to be
checked, enter the upper limit here.
Possible values are to &.
Type
Only for Protocol = 6'
The Type field shows the class of ICMP messages, the Code
field specifies the type of message in greater detail.
Possible values:
• 3( (default value)
• % @+1(
• 5 %"1
• % I%
• @%
• %
• * >%
• "1
• *+
• *+ @+1(
• $ @;
• $ @+1(
• 3 '9 @;
• 3 '9 @+1(
bintec elmeg GmbH
17 Firewall
bintec RS Series 395
To Next Page
Loading...
