Field Description
• 5"# (lowest priority)
Syslog messages are only sent to the host if they have a higher
or identical priority to that indicated, i.e. at syslog level
5"# all messages generated are forwarded to the host.
Facility Enter the syslog facility on the host.
This is only required if the Log Host is a Unix computer.
Possible values: 1%1 ,
.
The default value is 1%1.
Timestamp Select the format of the time stamp in the syslog.
Possible values:
• ) (default value): No system time indicated.
• *: System time without date.
• 5 K*: System time with date.
Protocol Select the protocol for the transfer of syslog messages. Note
that the syslog server must support the protocol.
Possible values:
• .5 (default value)
• *6
Type of Messages Select the message type.
Possible values:
• ( K3%%# (default value)
• (
• 3%%#
21 External Reporting bintec elmeg GmbH
494 bintec RS Series
To Next Page
Loading...
