Fig. 33: System Management->Remote Authentication->RADIUS->New
The System Management->Remote Authentication->RADIUS->Newmenu consists of
the following fields:
Fields in the Basic Parameters menu.
Field Value
Authentication Type Select what the RADIUS server is to be used for.
Possible values:
• 3% (default value only for PPP connec-
tions): The RADIUS server is used for controlling access to a
network.
• 3%%# (for PPP connections only): The RADIUS server
is used for recording statistical call data.
• 0# 3%: The RADIUS server is used for
controlling access to the SNMP shell of your device.
• % 3%: The RADIUS server is used for
sending configuration data for IPSec peers to your device.
bintec elmeg GmbH
7 System Management
bintec RS Series 81
To Next Page
Loading...
