77
Chapter 9 - Vector Elite Remote Control
1. Select the Advanced Training tab to display the Trolley Cue
controls. The Cuing drop-down menu will be displayed.
2. From the drop-down menu, select Anterior Chase.
3. Set the target speed by pressing the arrow buttons. See Figure
9-28.
Note: The target speed can be adjusted at any time, including
before and after the patient begins walking.
Figure 9-29: Warning Message - Training Data Not Being Saved
Charging the Remote Control
The remote control should be charged daily. Use the supplied AC adaptor and/or the micro USB cable
for charging.
Figure 9-28
To Next Page
Loading...
