Rev. 3.1 6.SpO2
BM5 (CS,CX) User’s Manual
4. Place the cursor to HIGH and press, when the color changes, move the cursor again to select the
targeted value, and press. Finally move to SpO2 and press.
(You may decide to perform the process in the opposite order, LOW to HIGH, to have the same
result.)
5. After pressing at SpO2-R, move the cursor right or left to LOW, and press.
6. Once the color is changed, move the cursor again to the selected value and press.
7. Place the cursor to HIGH and press, when the color changes, move the cursor again to select the
targeted value, and press. Finally move to SpO2-R and press.
8. With the selection of RETURN the user gets out of the menu.
ALARM
MAIN
MENU
RATE
VOLUME:
OFF
SPO2 ALARM LIMIT & LEVEL
UNITS LOW LEVEL
SPO2-%
SPO2-R BPM
100
50 150
RETURN
HIGH
MEDIUM
MEDIUM
ALARM
ON/OFF
ON
OFF% 91
To Next Page
Loading...
