Rev. 3.1 7. RESPIRATION
BM5 (CS,CX) User’s Manual
LEAD SELECT
This is for changing the reference LEAD for respiration
LEAD I or LEAD II can be selected.
LEAD
SELECT:
II
APNEA
DETECT :
ON
ALARM
SWEEP
SPEED :
25mm/s
RESP
SIZE :
X 2
MAIN
MENU
LEAD
SELECT:
II
APNEA
DETECT :
ON
ALARM
SWEEP
SPEED :
25mm/s
RESP
SIZE :
X 2
MAIN
MENU
ALARM
Alarm menu provide ALARM LIMIT and ALARM SOUND .
LEAD
SELECT:
II
APNEA
DETECT :
ON
ALARM
SWEEP
SPEED :
12.5mm/s
RESP
SIZE
X 2
MAIN
MENU
RESP
SIZE
X 2
RESP
SIZE :
X 2
Alarm Limit of Respiration Numeric Value is 5 ~ 150bpm
Alarm Limit of RESPIRATION APNEA Numeric Value is 3 ~ 30sec.
Warning sound or message displays activation setting when Respiration ALRAM occurs.
1. Move the ▶ mark to select RETURN, RESP or RESP-A, and press.
2. After a press in RESP, move the cursor right or left to LOW, and press.
3. After the color changed, move the cursor right or left to the selected value, and press.
4. Place the cursor to HIGH, and press. When the color has changed, move the cursor again to
select the value and press. Move to the RESP and press again. (You may decide to perform the
process in the opposite order, LOW to HIGH, to have the same result.)
5. Once RESP-A is pressed, move to LOW and press.
To Next Page
Loading...
