Rev.3.1 12. PRINT
BM5 (CS,CX) User’s Manual
PRINTER TIME
This is configuration of printed time in normal printing.
If the print out is not stopped in manual by PRINTER KEY, BM5 print out for setup time
after starting print out with PRINTER KEY. The configuration of time could be setup with 4
types in CONTINUOUS, 10 sec, 20 sec and 30 sec. The configuration of PRINTER
KEY(Real-time/Delayed time) is applied at print out with PRINTER TIME configuration.
PRINTER
TIME:
30SEC.
WAVE
FORM3:
RESP
WAVE
FORM2:
III
PRINTER
SPEED:
25mm/s
PRINTER
KEY:
REAL TIME
WAVE
FORM1:
II
PREV
MENU
MAIN
MENU
> CONT.
10SEC.
20SEC.
30SEC.
WAVE
FORM2:
III
PRINTER
SPEED:
25mm/s
PRINTER
TIME:
30SEC.
PREV
MENU
MAIN
MENU
PRINTER KEY
This menu is setup printing time delay in normal printing.
There are two menus for time configuration. One is Real-time, another is Delayed Time.
Real-time: This configuration makes printing out the newest data when the Printer Key is
pushed.
Delayed time: This configuration makes printing out the data after 5 seconds from the
Printer Key is pushed.
PRINTER
TIME:
30SEC.
WAVE
FORM3:
RESP
WAVE
FORM2:
III
PRINTER
SPEED:
25mm/s
PRINTER
KEY:
REAL TIME
WAVE
FORM1:
II
PREV
MENU
MAIN
MENU
To Next Page
Loading...
