Rev. 3.1 2. PATIENT/DATA MANAGEMENT 60
BM5 (CS,CX) User’s Manual
2.2 ALARM
Alarm is divided into two, alarm for the patient’s condition and for the product’s condition.
The patient’s alarm sounds when the diagnostic functions (ASYSTOLE, VTAC/VFIB, and VTAC) are
detected. Each alarm sound differs in order in order and volume according to the levels of HIGH,
MEDIUM, LOW and MESSAGE.
: Alarm sounds
: Number flashes
: Waves are printed out
: Alarm lamp flashes
Alarm for the Product
The machine gives alarm sounds for its system with a related message flashing.
ALARM LIMITS：The machine enables one to see and change the limits of alarm for all parameter
functions.
ALARM PRINT：with an ON/OFF setup, the related information is printed out whenever an alarm is
given.
ALARM VOLUME：volume of each alarm can be adjusted in 10 step.
To Next Page
Loading...
