Bionet BM5 - Alarm Print

Rev. 3.1 2. PATIENT/DATA MANAGEMENT 62
BM5 (CS,CX) User’s Manual
ALL ALARM LIMIT & LEVEL
UNITS LOW LEVEL
HR
50
SPO2-% % 90 100
SPO2-R BPM 50 150
RESP RPM 10 30
RESP-A SEC 0 20
NIBP-S mmHg 80 200
NIBP-M mmHg 40 140
NIBP-D mmHg 20 120
TEMP1 °C 30.0 42.0
RETURN
TEMP2
HIGH
MEDIUM
MEDIUM
LOW
HIGH
MEDIUM
MESSAGE
MESSAGE°C
BPM 150 HIGH
30.0 42.0
ST MESSAGEmV -1.0 1.0
ALARM
ON/OFF
ON
OFF
OFF
OFF
ON
OFF
OFF
ON
OFF
PVC MESSAGE/min 0 20 OFF
IBP1-S MESSAGEmmHg 80 200 OFF
IBP1-M MESSAGEmmHg 40 140
IBP1-D MESSAGEmmHg 20 120
IBP2-S MESSAGEmmHg 0 300 OFF
IBP2-M MESSAGEmmHg 3 15
IBP2-D MESSAGEmmHg 0 300
EtCO2 MESSAGEUNITS 25 50 OFF
FiCO2 MESSAGEUNITS 0 5 OFF
LEAD FAULT
MESSAGE
SEC
OFF
LOW BATTERY
MESSAGE
UNITS
OFF
EtCO2 - A
UNITS
0 20
OFF MESSAGE
ALARM PRINT
Set ON/OFF functions automatically. When the alarm is activated the corresponding information is
printed on heat sensitive paper. Alarm level upper than MEDIUM Level. But, LEAD FAULT AND
LOW BATTERY Alarm isn’t activated the alarm print when alarm is set.
ALARM
REVIEW
NURSE
CALL
ALARM
ALARM
PRINT:
ON
ALARM
VOLUME:
OFF
PREV
MENU
MAIN
MENU