Rev. 3.1 10. EtCO2 163
BM5 (CS,CX) User’s Manual
10.1 Introduction
ETCO2(End-Tidal CO2) is a device to see the concentration of end-tidal carbon dioxide, which
uses a method of measurement based on the non-dispersed IR absorption of CO2 using IR ray by
sampling a certain part of respiration through pipe during respiration.
EtCO2 connector position and accessory (Sidestream, Respironics)
EtCO2 Connector
LoFlo sidestream CO2 sensor and connector
Sidestream sensor Sidestream sensor connector
To Next Page
Loading...
