CB-110-4 43
Selecting the parameter groups
Enter password "8670" in parameter P1-14 to enable
extended parameter access. Additional parameter
groups will become visible and may be selected quickly
using the following method.
Whilst in the parameter
selection menu, press
the Navigate and Up or
Navigate and Down
Keys simultaneously
The next highest or
lowest accessible
parameter group will be
selected
Parameter groups
• P0 - Monitoring
• P1 - Compressor control (operating frequency,
ramps, control mode and user access level)
• P2 - Miscellaneous and resonance avoidance
• P3 - Pressure/temperature control
• P5 - Communication Modbus RTU
• P8 - Rack controller (2nd compressor)
To Next Page
Loading...