Bobcat MT55 - Safe Operation Is The Operator’s Responsibility; Safe Operation Needs A Qualified Operator

14 MT55 Operation & Maintenance Manual
SAFETY INSTRUCTIONS (CONT’D)
Safe Operation Is The Operator’s Responsibility
WARNING
Operator must have instructions before operating the
machine. Untrained operators can cause injury or
death.
W-2001-0502
IMPORTANT
This notice identifies procedures which must be
followed to avoid damage to the machine.
I-2019-0284
DANGER
The signal word DANGER on the machine and in the
manuals indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
D-1002-1107
WARNING
The signal word WARNING on the machine and in the
manuals indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
W-2044-1107
The Bobcat mini track loader and attachment must be in
good operating condition before use.
Check all of the items on the Bobcat Service Schedule
Decal under the 8-10 hour column or as shown in the
Operation & Maintenance Manual.
Safe Operation Needs A Qualified Operator
For an operator to be qualified, he or she must not use
drugs or alcoholic drinks which impair alertness or
coordination while working. An operator who is taking
prescription drugs must get medical advice to determine
if he or she can safely operate a machine.
A Qualified Operator Must Do The Following:
Understand the Written Instructions, Rules and
Regulations
• The written instructions from Bobcat Company
include the Delivery Report, Operation &
Maintenance Manual and machine signs (decals).
• Check the rules and regulations at your location. The
rules may include an employer’s work safety
requirements. Regulations may apply to local driving
requirements. Regulations may identify a hazard
such as a utility line.
Have Training with Actual Operation
• Operator training must consist of a demonstration and
verbal instruction. This training is given by your
Bobcat dealer before the product is delivered.
• The new operator must start in an area without
bystanders and use all the controls until he or she can
operate the machine and attachment safely under all
conditions of the work area.
• Safety Videos, which provide general information
regarding safe and efficient equipment operation, are
available from your Bobcat dealer.
Know the Work Conditions
• Know the weight of the materials being handled.
Avoid exceeding the Rated Operating Capacity
(ROC) of the machine. Material which is very dense
will be heavier than the same volume of less dense
material. Reduce the size of the load if handling
dense material.
• The operator must know any prohibited uses or work
areas, for example, he or she needs to know about
excessive slopes.
• Know the location of any underground lines. Call local
utilities or the TOLL FREE phone number found in the
Before Operation section of this manual.
• Wear tight fitting clothing. Always wear safety glasses
when doing maintenance or service. Safety glasses,
respiratory equipment, or hearing protection are
required for some work. See your Bobcat dealer
about Bobcat safety equipment.
SI ML-0913
This symbol with a warning statement means:
“Warning, be alert! Your safety is involved!”
Carefully read the message that follows.
Safety Alert Symbol
16 of 122
Dealer Copy -- Not for Resale