EasyManua.ls Logo

Bobcat MT55 - OPERATOR SAFETY WARNINGS; Safety Alert Symbol; SAFETY EQUIPMENT

Bobcat MT55
122 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
OPERATOR SAFETY WARNINGS
B-23046
CORRECT
Never drive over drop offs or jerk
on the controls.
WARNING
Operator must have instructions
before operating the machine.
Untrained operators can cause
injury or death.
W-2001-0502
Do not use loader in atmosphere
with explosive dust, explosive
gas, or where exhaust can
contact flammable material.
Never leave loader with engine
running or with lift arms up.
To park, engage parking brake,
lower lift arms and put
attachment flat on the ground.
Do not travel or turn with lift
arms up.
Keep heavy end uphill.
Never modify equipment.
Use only attachments approved
by Bobcat Company for this
model loader.
Safety Alert Symbol: This symbol with a warning statement,
means: “Warning, be alert! Your safety
is involved!” Carefully read the message
that follows.
Check for utility lines before
digging.
OSW43-0409
B-23048
WRONG
B-23782A
CORRECT
B-23052
WRONG
CORRECT
B-23024
B-23045
WRONG
WRONG
B-23049
B-23051
WRONG
CORRECT
P-90216
Never carry riders.
Keep bystanders away from
work area.
CARRY LOAD LOW.
Keep load level when raising lift
arms.
The Bobcat Loader must be equipped with safety items necessary for each job. Ask your dealer about attachments and
accessories.
SAFETY EQUIPMENT
1. SAFETY SIGNS (DECALS): Replace if damaged.
2. LIFT ARM SUPPORT DEVICE: Replace if damaged
3. PARKING BRAKE: Check function, adjust or repair if necessary.
4. REVERSE STOP PANEL: Check function.
Never use the loader without
instructions. See machine signs
(decals) and Operation &
Maintenance Manual.
Never exceed Rated Operating
Capacity.
3 of 122
Dealer Copy -- Not for Resale

Table of Contents

Related product manuals