33 MT55 Operation & Maintenance Manual
RIDE-ON PLATFORM (HINGED) (OPTION)
Procedure
Installing The Platform
Figure 26
Install the platform tabs into the slots (Item 1) [Figure 26]
in the machine frame.
Align the holes and install the pin (Item 2) [Figure 26]
through the holes. Install the fastener (Item 3)
[Figure 26] and put the ring in the locked position (both
sides).
AVOID INJURY OR DEATH
When using the ride-on platform:
• Operate only with feet on platform and hands on
controls or grab handles.
• Always look in the direction of travel.
• Make sure swing area is clear of bystanders and
objects.
• Avoid drop-offs and obstacles.
W-2480-1003
Dealer Copy -- Not for Resale
To Next Page
Loading...