25 MT55 Operation & Maintenance Manual
ENGINE SPEED CONTROL
Operation
Figure 9
Move the engine speed control lever up (Item 1) to
increase engine speed. Move the lever down (Item 2)
[Figure 9] to decrease engine speed.
For maximum performance, run the engine at full speed.
PARKING BRAKE
Operation
Engage the parking brake whenever you stop the mini
track loader.
Figure 10
Move the parking brake lever slightly forward, to the left
and then backward to engage the parking brake (Item 1)
[Figure 10].
Move the lever forward, to the right and then slightly
backward (Item 2) [Figure 10] until the lever is inserted
into the latch to disengage the parking brake.
Figure 11
NOTE: Move the machine forward or backward
slightly to ensure both pins (Item 1)
[Figure 11] are engaged (between the teeth of
the track drive sprockets), or to remove load
on pins when disengaging the parking brake.
Dealer Copy -- Not for Resale
To Next Page
Loading...