Bobcat MT55 - REAR DOOR; Opening And Closing; Striker Adjustment; Bumper Adjustment

69 MT55 Operation & Maintenance Manual
REAR DOOR
Opening And Closing
Figure 77
Release the latch (Item 1) [Figure 77].
Figure 78
The rear door will pivot down [Figure 78] to provide
access for maintenance.
NOTE: When the optional ride-on platform is
installed, the rear door will not fully open.
WARNING
Keep the rear door closed when operating the
machine. Failure to do so could seriously injury the
operator.
W-2410-0107
Striker Adjustment
Figure 79
Loosen the two bolts (Item 1) and re-position the striker
(Item 2) [Figure 79] until the rear door latches properly.
NOTE: The striker mounting bolts (Item 1) [Figure 79]
are also secured with nuts on the backside of
the striker.
NOTE: The striker has slots that allow movement up
or down to achieve proper engagement of the
rear door latch.
With the striker at the proper position tighten the two
bolts (Item 1) [Figure 79].
Bumper Adjustment
Figure 80
Loosen jam nut (Item 1) [Figure 80].
Adjust the bumpers (Item 2) [Figure 80] until the rear
door latches properly and there is no movement after the
rear door is closed.
When the adjustments are completed, tighten the jam nut
(Item 1) [Figure 80].
P-45413
1
P-81895
P-59207
2
1
P-59345A
2
2
1
71 of 122
Dealer Copy -- Not for Resale