787 Flight Crew Operations Manual
DO NOT USE FOR FLIGHT
Flight Instruments, Displays -
Electronic Checklist Description
Copyright © The Boeing Company. See title page for details.
10.60.2 D615Z003-TBC
Checklist Pages
The checklist is displayed on one or more pages. Page keys are located on the right
side of each checklist containing more than one page. Page keys are not shown on
checklists containing only one page.
When a checklist is complete and there are no additional checklists in the
non-normal checklist queue, the cursor automatically moves to the normal
checklist key in the lower left corner of the display. Pressing the cursor select
switch displays the next sequential normal checklist. If there is one or more
checklists in the non-normal queue, the cursor automatically moves to the
non–normal checklist key in the lower right corner of the display. Pressing the
cursor select switch displays the next appropriate non-normal checklist (if only
one is in the queue) or the non-normal checklist queue.
When a checklist has more than one page, and the checklist steps on the current
page are complete, the cursor automatically moves to the checklist page key
corresponding to the next page. CONTINUED is displayed on the bottom of the
page. Pressing the cursor select switch advances to the next checklist page. When
the last page is complete, the cursor moves to the normal or non–normal checklist
key as described above.
Checklist Line Items
Each step in a checklist is referred to as a line item. After selecting a checklist, the
current line item box automatically encloses the text of the first incomplete line
item. When the cursor is on that line item, the cursor selection box encloses the
current line item box. When the line item becomes complete, the cursor, cursor
selection box, and current line item box move to the next incomplete line item.
Incomplete checklist line items appear as white text. Complete line items appear
as green text with a complete indicator (green check mark) to the left. Overridden
and inactive line items are displayed in cyan.
Closed Loop Line Items
Closed loop line items are steps in the checklist that involve the continuous and
automatic monitoring of switch, lever, or selector position. In a limited number of
cases, actual system state, such as flap or landing gear position, is monitored.
When the control is in the required position, the line item text color changes from
white to green. In addition, a complete indicator is displayed left of the line item.
The current line item box then moves to the next line item to be completed.
October 31, 2007
To Next Page
Loading...
