787 Flight Crew Operations Manual
DO NOT USE FOR FLIGHT
Flight Management, Navigation -
FMC Cruise
Copyright © The Boeing Company. See title page for details.
11.42.12 D615Z003-TBC
Displays outbound course from entered waypoint.
Shows the active waypoint name is modified with P/P or waypoint outbound
entry.
Valid input is any course from 000° through 360°. May be changed until executed.
Select Desired Waypoint Page
The SELECT DESIRED WPT page displays after a waypoint entry when the
FMC encounters more than one location for the same waypoint name. Selection
of a waypoint returns the display to the previous page.
Displays the identifier for the duplicate named waypoints. Select the correct
waypoint by pushing the applicable left or right line select key.
Display a sorted list of waypoints with identifier, navaid type, frequency, and
coordinates:
• when page is accessed as a result of a flight plan modification, sort is based
on proximity to the waypoint preceding the entered waypoint
• when page is accessed as a result of a PROGRESS 1/4, FIX INFO,
DIR/INTC, REF NAV DATA or CENTER MAP entry, sort is based on
proximity to current airplane position
Push - selects waypoint location for use; returns display to page previously in use.
4
Intercept Course From (INTC CRS FROM)
1
Identifier
2
Waypoint Lines
3 5
ROVONE
12/
EMDONE
CATROVONE
TNIOPYAWONE
TNIOPYAWONE
EMDONE
TPWDERISEDTCELES
8.05230E7.2123S
5.23101W2.5265S
05N070W254. 1 7.2
05N070W254. 1 7.2
7.51101E0.7244N
oo
oo
oo
oo
oo
oo
5.1356OW0.8304N
05.011
6.611
4.211
8.411
1
4
2
June 16, 2008
To Next Page
Loading...
