Boeing 787-8 - Page 1075

787 Flight Crew Operations Manual
DO NOT USE FOR FLIGHT
Flight Instruments, Displays -
Electronic Flight Bag - Controls
and Displays
Copyright © The Boeing Company. See title page for details.
D615Z003-TBC 10.70.43
Active only after an airport and runway are selected in the ARPT and RWY fields.
Selection displays the Add Airport page.
Selection displays the NOTAMs page.
Displays a touch sensitive keypad at the bottom of the page that is used for data
entry.
Selection displays the Landing page.
Selection copies data from the FMC to the takeoff and landing pages.
Selection displays the send output menu.
Selection initiates the calculation of takeoff data.
Becomes active only after all the required data has been entered.
Selection toggles between the display of full thrust data and assumed temperature
data for the airport/runway entered.
Selection displays the MEL page.
Selection displays the CDL page.
Indicates an active NOTAM, MEL, or CDL item exists. This item is considered in
the performance calculations.
Displays the runway and temperature data upon which the calculations are based.
Selection turns the soft key green and displays the full length runway data in the
performance display area.
If the Takeoff Weight field is left blank, the soft key displays the runway and the
calculated maximum gross weight.
If an assumed temperature calculation is not possible, NO ATM displays in the
soft key data field.
If no takeoff performance is available, NO T/O displays in the soft key data field.
2
ADD Airport (ARPT) Soft Key
3
Notice to Airmen (NOTAMS) Soft Key
4
SHOW KYBD (Keyboard) Soft Key
5
SHOW LANDING Soft Key
6
COPY FMC DATA Soft Key
7
SEND OUTPUT Soft Key
8
CALC (Calculate) Soft Key
9
SHOW FULL/SHOW ATM Soft Key
10
Minimum Equipment List (MEL) Soft Key
11
Configuration Deviations List (CDL) Soft Key
12
Amber bar
13
Full Length Runway Soft Key
June 16, 2008