EasyManua.ls Logo

Boeing 787-8 - Page 110

Boeing 787-8
1562 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
787 Flight Crew Operations Manual
DO NOT USE FOR FLIGHT
Normal Procedures -
Amplified Procedures
Copyright © The Boeing Company. See title page for details.
NP.21.24 D615Z003-TBC
PFD/MFD selector ....................................................................... NORM
Do the Initial Data and Navigation Data steps from the CDU/EFB
Preflight Procedure and verify that the IRS alignment is complete
before checking the flight instruments.
Flight instruments ..........................................................................Check
Verify that the flight instrument indications are correct.
Verify that only these flags are shown:
•TCAS OFF
NO VSPD until takeoff V–speeds are selected
Verify that the flight mode annunciations are correct:
autothrottle mode is blank
roll mode is TO/GA or HUD TO/GA
pitch mode is TO/GA
AFDS status is FLT DIR
Select the MAP mode.
Integrated standby flight display ......................................................... Set
Verify that the approach mode display is blank.
Set local altimeter setting.
Verify that the flight instrument indications are correct.
Verify that no flags or messages are shown.
SPEEDBRAKE lever ...................................................................DOWN
Reverse thrust levers ...................................................................... Down
Forward thrust levers..................................................................... Closed
Flap lever............................................................................................. Set
The flap position indicator does not show when the flaps are up.
Set the flap lever to agree with the flap position.
Parking brake ...................................................................................... Set
Verify that the PARKING BRAKE SET message is shown.
STABILIZER cutout switches .......................................... Guards closed
February 15, 2010

Table of Contents

Related product manuals