787 Flight Crew Operations Manual
DO NOT USE FOR FLIGHT
Normal Procedures -
Amplified Procedures
Copyright © The Boeing Company. See title page for details.
D615Z003-TBC NP.21.29
Engine Start Procedure
Select the secondary engine indications. F/O
Start sequence ........................................................Announce C
The engines may be started at the same time.
Call “START ____ ENGINE” C
Engine START selector ............................................. START F/O
FUEL CONTROL switch ..............................................RUN C
If the engines were not started at the same time:
After the engine is stable at idle, start the other engine.
Autostart corrects for:
• no EGT rise
[Option – GE engines]
• no oil pressure rise
• a hot start
• a hung start
• no N1 rotation
• a compressor stall
• failure of both starters
[Option – RR engines]
No crew monitoring or action is required for oil pressure during start.
If the EICAS message ENG OIL PRESS is displayed, accomplish the
ENG OIL PRESS checklist.
February 15, 2010
To Next Page
Loading...
