787 Flight Crew Operations Manual
DO NOT USE FOR FLIGHT
Flight Management, Navigation -
FMC Preflight
Copyright © The Boeing Company. See title page for details.
D615Z003-TBC 11.40.27
Displays transitions compatible with the selected SID.
Push –
• selects transition for entry in the route
• other transitions no longer display
Displays airline-defined single engine-out SIDs for selected airport. EO SID can
be viewed before takeoff by line selecting and selecting the Legs page. EO SID
automatically selected during takeoff if an engine-out detected prior to “flaps up”.
The modification can be either executed or erased. If an EO SID does not exist,
NONE displays.
PUSH - displays EO SID as the selected SID.
Erase displays when a route modification is pending. INDEX displays when no
route modification is pending.
ERASE push – removes route modifications not executed and displays the
original route.
INDEX push – displays the DEP/ARR INDEX page.
Displays a list of runways for the selected airport.
The runway selected on the RTE 1/X page displays as <SEL> or <ACT>.
Push –
• selects runway for use in the route. All other runways no longer display
• SIDs associated with selected runway remain, all others no longer display
• subsequent change of a runway deletes departure procedures previously
selected
Selecting an option displays <SEL> inboard of the option and creates a route
modification. After executing the modification, <SEL> becomes <ACT>.
Executing a modification or leaving the page and returning displays all options
and the <SEL> or <ACT> prompts.
Push – displays the related RTE page.
2
Transitions (TRANS)
3
Engine Out (EO) SIDS
4
ERASE or INDEX
5
RUNWAYS
6
Selecting Options
7
ROUTE
October 31, 2007
To Next Page
Loading...
