787 Flight Crew Operations Manual
DO NOT USE FOR FLIGHT
Flight Management, Navigation -
FMC Descent and Approach
Copyright © The Boeing Company. See title page for details.
11.43.26 D615Z003-TBC
Push – selects DIRECT TO route option.
All flight plan waypoints are deleted.
Push –
• with scratchpad empty, selects OFFSET route option
• with offset data in scratchpad, enters offset data. Does not select offset
option
Entry and exit to the offset is the same as for the RTE page offset. Flight plan
waypoints are retained.
Push –
• with scratchpad empty, selects OVERHEAD option
• with overhead data in scratchpad, enters overhead data. Does not select
overhead route option
Displays active waypoint in flight plan.
The waypoints up to the selected or entered overhead waypoint are retained, then
routing is direct to the alternate airport. All waypoints after overhead waypoint are
deleted.
Enter any waypoint in the active or modified route.
This prompt performs the same function as described on the cruise page in the
FMC Cruise section. It can be selected before or after the diversion is selected.
1
VIA DIRECT TO
2
VIA OFFSET
3
VIA OVERHEAD
4
Engine Out (ENG OUT)
>
>
AIV
4/4
TLA
HWMKTREVID
HWMK
NTLA
---------
WONTREVID<
---------- --------------
DETCELESAESRE<
---------- ----------------
NTLAHWMKMOD
032LF>LES<OTTCERID
11
June 16, 2008
To Next Page
Loading...
