Boeing 787-8 - Page 148

787 Flight Crew Operations Manual
DO NOT USE FOR FLIGHT
Supplementary Procedures -
Automatic Flight
Copyright © The Boeing Company. See title page for details.
SP.4.2 D615Z003-TBC
Track Hold
If the airplane is operating in polar regions:
HEADING REFERENCE switch .............................................TRUE
HEADING/TRACK switch ............................................................. Push
Verify TRK is displayed in the HDG/TRK window.
Heading/track HOLD switch............................................................ Push
Verify TRK HOLD is displayed in the roll mode annunciator.
Track Select
Maintains the airplane track the same as the selected track.
If the airplane is operating in polar regions:
HEADING REFERENCE switch .............................................TRUE
HEADING/TRACK reference switch.............................................. Push
Verify TRK is displayed in the HDG/TRK window.
Heading/track SELECT switch ........................................................ Push
Verify TRK SEL is displayed in the roll mode annunciator.
Heading/track selector ....................................................................Rotate
Set desired track in the HDG/TRK window.
Altitude Hold
Altitude HOLD switch ..................................................................... Push
Verify ALT is displayed in the pitch mode annunciator.
Flight Level Change, Climb or Descent
ALTITUDE selector .......................................................................Rotate
Set the desired altitude in the MCP ALTITUDE window.
FLCH switch .................................................................................... Push
Verify FLCH SPD is displayed in the pitch mode annunciator.
IAS/MACH selector .......................................................................Rotate
Set the desired speed in the IAS/MACH window.
October 31, 2007