Boeing 787-8 - Page 588

787 Flight Crew Operations Manual
DO NOT USE FOR FLIGHT
Communications -
MFD Communications Functions
Copyright © The Boeing Company. See title page for details.
5.40.6 D615Z003-TBC
CANCEL Displayed when:
• uplink message is
displayed which does not
require an accept or reject
response, or
• an uplink message is
displayed which has been
accepted, rejected, or
• review message is
displayed
Inhibited for first 2 seconds of
message display.
Message is removed.
DELETE
(ATC
reports)
Displayed when a downlink
report page is open for entry.
Select:
• deletes the report without
sending.
• displays the COMM menu
DISARM
(ATC
reports)
Displayed when an armable
report is ARMED:
• REPORT LEAVING
• REPORT LEVEL
• REPORT PASSING
• REPORT REACHING
Select:
• disarms automatic report
downlink to ATC
• key function changes to ARM
• Report status changes from
ARMED to OPEN
DISPLAY
REPORT
Displayed after accepting an
uplink message which contains a
report.
Displays the downlink report attached
to an uplinked message.
DISPLAY
REQUEST
Displayed after accepting an
ATC uplink message which
contains a request.
Downlink request which required an
ATC response is displayed,
EXIT Displayed when:
• a downlink message is
displayed, or
• a manager page is
displayed
COMM main menu is displayed.
EXIT
MENU
Displayed when menu is
displayed.
COMM main menu is displayed.
LOAD FMC
(ATC
uplink)
Displayed when uplinked ATC
message contains data which can
be loaded into the FMC.
Inhibited when active route is in
a MOD condition.
Select:
• FMC data is transferred into
the active route, and
• FMC modification is started
Command
key label
Displayed/Inhibited Key function
August 14, 2009