Böhnke + Partner bp308 - Page 129

| | | 10..350 [150] mm
| | | * Lower door zone
| | | 10..350 [150] mm
| | | * Upper level zone
| | | 1..350 [10] mm
| | | * Lower level zone
| | | 1..350 [10] mm
| | | * Re-level area up
| | | 2..350 [20] mm
| | | * Re-level area down
| | | 2..350 [20] mm
| | | * Pawl device lifting distance
| | | 0..500 [50] mm
| | | * Inspection stop before top floor level
| | | off/1..3000 [off] mm
| | | * Inspection stop before bottom floor level
| | | off/1..3000 [off] mm
| | | * Distance driving monitoring
| | | 100..50000 [500] mm
| | | * Stop before floor level on automatic rescue operation
| | | off/1..9999 [100] mm
| | |
| | +- Speed difference
| | | * Signal (201) at v <
| | | off/1..65535 [off] mm/s
| | | * Signal (202) at v <
| | | off/1..65535 [off] mm/s
| | | * Signal (203) at v <
| | | off/1..65535 [off] mm/s
| | | * Run-in velocity pre-opening doors
| | | 0..800 [800] mm/s
| | |
| | +- Position threshold
| | | * Signal (581) at position >
| | | off/1..500000 [off] mm
| | | * Signal (582) at position >
| | | off/1..500000 [off] mm
| | | * Signal (583) at position >
| | | off/1..500000 [off] mm
| | | * Signal (584) at position >
| | | off/1..500000 [off] mm
| | |
| | +- Offset corr. top
| | | * Offset correction top 1..127
| | | off/1..1000 [off] mm
| | |
| | +- Offset corr. bot.
| | | * Offset correction bottom 1..127
| | | off/1..1000 [off] mm
| | |
| | +- Offset corr. upward
| | | * Offset correction upward 1..127
| | | off/1..1000 [off] mm
| | |
| | +- Offset corr. downw.
| | * Offset correction downward 1..127
| | off/1..1000 [off] mm
| |
| +- Level positions
| | * Level position 1..127
| | 0..1000000 [0] mm
| |
| +- Learn mode
| |
| +- Change encoder
| |
| +- Clear level data
|
+- Maintenance
| |
| +- Maintenance function
| | * Random calls
| | - off [Default]
| | - Not limited
| | - Limited to 100 trips
| | - Limited to 500 trips
| | - Shuttle upper/lower floor
| | * Engineer on side
| | - off [Default]
| | - on
131