S P00 D00 159 2019-03-01| Robert Bosch GmbH
A/C service preparation | ACS 752 | 49 en
9. Testing the vehicle air con-
ditioning system
9.1 Visual inspection
Prior to service, check all visible components and connec-
tions on the vehicle air conditioning system for damage.
9.2 Pressure test
! Follow the additional ACS 752 menu prompting.
1. Call up the start screen.
2. Press <Menu>.
3. Press <2> for "Functions".
4. Select <2> for "Pressure test".
5. Follow messages on screen.
i Return with <ESC>.
8. A/C service preparation
WARNING – Risk of burns from hot engine
components
Contact with hot engine components will
cause severe burns.
¶ Allow the engine to cool down.
¶ Wear protective gloves.
WARNING – Risk of frostbite from escap-
ing refrigerant
Refrigerant causes severe frostbite on the
skin.
¶ Check the service hoses for damage.
¶ Firmly connect the service quick-release
couplings to the service hoses.
¶ Wear safety goggles.
¶ Wear protective gloves.
i Observe the vehicle manufacturer's recommenda-
tions for A/C service on vehicles with a low-pressure
connection only.
1. Stand the ACS 752 on a flat, vibration-proof surface.
2. Actuate the brake to stop the ACS 752 rolling.
3. Connect the power supply cord to the power supply.
4. Switch on the master switch.
! Observe the manufacturer's instructions for the cor-
responding vehicle before performing A/C service.
! The ACS 752 is only to be operated with R134a
refrigerant. Check which refrigerant is used for the
vehicle before performing A/C service.
! The ACS 752 cannot be used for air conditioners
repaired using a chemical sealant. Non-observance
will invalidate the warranty.
! Never attempt to close the valves of the internal re-
frigerant cylinder whilst the ACS 752 is in operation.
To Next Page
Loading...
