120 en | Keypad Installer menu Control Panels
2016.06 | 08 | F.01U.303.996 Installation and System Reference Guide Bosch Security Systems, Inc.
– Delete characters. B91x/B92x/B93x keypads use the [ESC] key as a backspace key. Press
it once to delete the last character, or press and hold [ESC] to delete all the characters.
The B94x key has a (backspace) key on each keyboard screen.
– Enter letters. For B91x/B92x/B93x keypads, press a number key repeatedly to scroll
through the number and letters shown on the key. For B94x, use the ABC keyboard.
– Special characters. For entering special characters on B91x/B92x keypads, refer to the
table below. For entering special characters on a B93x, use the corresponding softkey.
For entering special characters or accented characters on a B94x, press or to
open the corresponding keyboard.
Characters B91x/B92x
Special dialing characters in phone numbers
(*, C [3-sec pause], D [Dial Tone Detect])
Press [CMD]. The special characters menu
appears. Use [PREV] or [NEXT] to cycle
through the characters. Press [ENTER] to
choose the character shown.
Network address characters Use the [0] key to enter a period or dash.
To Next Page
Loading...
